The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They stop the car from starting without a key fob. They also can be used to stop hotwiring as well as traditional methods of vehicle theft. However, newer methods like key replication and relay theft are becoming more common.
Designed to combat these recent trends The ghost immobiliser works to make your vehicle inaccessible. It doesn't use LED indications radio signals, key fobs, and is quiet and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is a TASSA-approved product and insurance companies also endorse it. It operates quietly and is virtually unnoticeable to thieves. It uses buttons on your steering wheel, the centre console and door panels to create a unique pin code that must be entered before you can start your car. You can create as many as 20 different sequences in order to increase security. The system is easy to install and does not require any additional hardware or wiring.
It is recommended to use a reputable CAN immobiliser installer that specialises in your specific vehicle type to get the most effective results. Ideally, they'll have a workshop in your area that you can visit to have your installation completed. You will also find a range of tools and equipment that can help you with the installation. These include hand tools, a multimeter, and insulation tape as well as heat shrink tubing to secure connections. A user manual will give you instructions for the wiring in your vehicle.
Before beginning the installation remove the battery from the circuit to prevent short circuits and airbag deployment. It is important to double-check the location of the CAN H and L wires as the wrong identification could result in improper system integration. It is also a great idea to label or mark the wires. Also, utilize a multimeter for verification that the power source you have identified is able to provide a consistent 12V power supply.
Advanced thieves can employ different methods to evade the Ghost Immobiliser, which includes blocking and making false signals. These techniques work by amplifying the signal that is sent from your key fob to the vehicle's electronic control unit. With advanced anti-jamming techniques and a constant monitoring system your vehicle will be protected from these sophisticated attacks.
Security Improved
Ghost immobilisers provide an additional layer of protection to your vehicle from theft. It is a PIN code protection system that is operated by using buttons that are already on the steering wheel or on your dashboard which makes it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden in your vehicle, with no lights or other indicators that would warn thieves of its presence. It is directly connected to the ECU of your car via the data bus. This means it is not susceptible to relay attacks or hacking.
The system is a valuable investment for those who own prestige cars, since they are at a higher chance of theft because of their value and their popularity. Its enhanced security features protect against key duplicates, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers can also be paired with an app, allowing you can easily arm and dearm them. They also come with a service/valet mode that allows you to temporarily disable them while your vehicle is being serviced or repaired.
A ghost immobiliser has another excellent feature that it doesn't require any wire cutting. This is a fantastic option, particularly if your vehicle is newer and doesn't include an immobiliser. Certain systems also work with GPS tracking devices, adding an additional layer of security to your car. Having a GPS tracker can also help you reduce the cost of insurance. If you choose to buy an immobiliser that is ghost, make sure it's TASSA-certified and an experienced installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser is designed to be compatible with all major brands and models of vehicles that will protect your pride and joy against theft. It makes use of buttons on your steering wheel, centre console or door panels to generate a unique pin code that must be entered before you can drive your vehicle. It is tamperproof and undetectable, and is backed by a three-year warranty. It is also fully endorsed by insurance companies. This means you will be able to lower your premiums.
The Ghost system is different from standard immobilisers that use the key fob to provide ignition control. It connects directly to the engine controller via the CAN bus. It is almost impossible to disable, remove or hack. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can create an PIN that is simple to remember, yet mathematically unattainable to thieves. Continue Reading can alter and customize the PIN at any time to ensure your vehicle's security even if it's located in a parking lot or on the street. You can also choose valet or service mode in the event that someone else needs to drive your vehicle for a short period, such as when it is in the garage. This feature can also help to prevent your car from being stolen by a shady mechanic. To give you more security you can choose a Ghost call alert that will inform you when your car is in motion or if it's moved.
Convenience
The ghost immobiliser guards your vehicle from theft techniques like key cloning or relay attacks. It works by connecting to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your car, making the installation of this system a good idea for all drivers.
Once installed, you will be required to enter a PIN sequence that is up to 20 digits using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely concealed and undetectable to thieves, since it doesn't emit any radio frequency signals. It is also able to be set to change the PIN of the user, which further enhances its security. The system is also designed to stop cutting the circuit and makes it virtually impossible to tamper with.
Some systems allow you to connect directly to the immobiliser using an app on your phone, disarming it immediately if you forget your PIN. Some systems also have a service/valet setting that allows you to start your car for instance, if you drop it off at valet or garage.
The Ghost Immobiliser is also indetectable to thieves as it does not transmit radio signals, a major advantage over other aftermarket car security systems. It is also simple to use, and doesn't require complex wiring. It can also be used together with a dash camera for additional security. Dash cams include the Thinkware F70, which features clear and crisp HD dashcam footage in 1080p HD, Format Free Technology and parking mode. The system can also be hardwired to ensure optimal performance and longevity.
Installation
If you want to protect your vehicle from thieves it is important to select the right immobiliser. This device can prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This stops thieves from stealing the signal and copying the key fob to begin your vehicle. It also can detect any time it has been tampered with and alert the owner of the vehicle.
The device is easy to install and can be integrated with your vehicle's existing systems. It doesn't require any modification to the vehicle wiring and can be installed in a concealed location like under the dashboard. Follow the instructions in the manual to ensure that the device is properly installed. After installation, it's crucial to test the system. This will confirm that the immobiliser ghost is functioning exactly as it was intended to.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to remove the system or bypass it. The installation process generally takes 2-3 hours.
During the installation process it is recommended that you review the wiring diagram of the vehicle model you are using. This will help you locate the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Check all connections to ensure they are safe and well-insulated.
Once the installation is completed, you are able to start using the Ghost Immobiliser normally. It will disable your vehicle's ignition if it is not started using the correct PIN, which you can assign yourself. The immobiliser ghost cost can also be put into Service/Valet mode for times when you need to hand over your vehicle for servicing or valet parking.